SCULPTURE MILLING CUTTERS

Cutter height - 50 mm. The height of the working surface -12 mm, diameter - 8 mm.
Shank diameter - 3 mm.
Designed for art, sculptural and other complex works.

A set of milling cutters from 5 numbers: 200, 400, 800, 1500, BUFF.
Use preferably with water.
Begin polishing from 5 - 7 thousand revolutions (No. 200) and gradually reduce to 2 thousand ( BUFF).
After BUFF on granite, do 'knurling' with a felt drill with 'green', while the felt should be dry, and 'green' should be the consistency of thick sour cream.

Milling cutter for stone carving, in the form of a 'Turbo' disk, with a diameter of 50 mm and a diamond layer thickness of 2.0 - 2.3 mm.
Shank diameter - 6 mm.
Designed for art, sculptural and other complex works .

Cutter height - 70 mm. The height of the working surface is 20 mm, the diameter is 12 mm,
The diameter of the shank is 6 mm.
Designed for art, sculpture and other complex works using water cooling.

Cutter height - 70 mm. The diameter of the working surface - 10 mm.
The diameter of the shank - 6 mm.
Designed for art, sculptural and other complex works using water cooling.

Milling cutter from the TYPHOON MINI series with M14 thread for grinding hard rocks (granite, gabbro) in hard-to-reach places with hand sanders.
Total height of the cutter - 100 mm, work surface height - 50 mm, diameter - 22 mm.

Cutter height - 70 mm. The height of the working surface - 12 mm, the upper diameter - 15 mm.
The diameter of the shank - 6 mm.
Designed for art, sculpture and other complex works using water cooling.

Cutter height - 70 mm. The height of the working surface is 30 mm, the diameter of the base is -15 mm.
The diameter of the shank is 6 mm.
Designed for art, sculpture and other complex works using water cooling.

Cutter height - 70 mm. The height of the working surface - 2.0-2.5 mm, diameter - 25 mm.
Shank diameter - 6 mm.
Designed for art, sculptural and other complex works using water cooling.

Cutter height - 70 mm. The height of the working surface - 2.5 mm, diameter - 15 mm.
Shank diameter - 6 mm.
Designed for art, sculptural and other complex works using water cooling.

Cutter height - 90 mm. The height of the working surface is 40 mm, the diameter is 12 mm.
The diameter of the shank is 6 mm.
Designed for art, sculptural and other complex works using water cooling.

Cutter height - 60 mm, including work surface height - 10 mm, diameter - 15 mm.
Shank diameter - 6 mm.
Designed for art, sculpture and other complex works using water cooling.

A cup for grinding stone of medium and high strength without cooling.

A mill with a diameter of 50 mm and a diamond layer thickness of 1.8 mm.
Shank diameter - 6 mm, length - 70 mm.
Designed for art, sculptural and other complex works.

Cutter height - 70 mm. The height of the working surface is 0.8 - 0.9 mm, diameter - 35 mm.
Shank diameter - 6 mm.
Designed for art, sculpture and other complex works using water cooling.

Cutter height - 70 mm. The diameter of the working surface - 15 mm.
The diameter of the shank - 6 mm.
Designed for art, sculpture and other complex works using water cooling.

A cup for grinding stone of medium and high strength without cooling.

Cutter height - 50 mm. The height of the working surface is 1 mm, the diameter is 20 mm.
The diameter of the shank is 3 mm.
Designed for art, sculptural and other complex works on hard rocks of natural stone.

Cutter height - 50 mm. The height of the working surface is 1 mm, the diameter is 20 mm.
The diameter of the shank is 6 mm.
Designed for art, sculptural and other complex works on hard rocks of natural stone.